Taida GY6 150 232cc Engine Package with Taida Long Engine Case

From $1,625.00

To $4,246.99 was $4,261.99

DROWsports build some of the baddest GY6 232 Engine around. We use all brand new hand-selected hardware and parts for our 232cc motor builds. All of our motors are built to run off of 91 oct pump gas but we can build to any spec or oct requirement.

ETA 3-4 Weeks. Crank balancing, porting, etc. is an additional 3-4 weeks.

Customize Taida GY6 150 232cc Engine Package with Taida Long Engine Case
1 x Complete Taida GY6 2V 232cc Engine Package with Long Case (AC 67mm Bore/66mm Stroke)   + $1,625.00

* Required Fields

Your Customization
Taida Parts GY6 232cc Big Bore kit
Taida GY6 150 232cc Engine Package with Taida Long Engine Case

In stock

$1,625.00

Summary

    DROWsports Taida GY6 232cc kit is the biggest baddest motor you can build using a GY6 platform.   

    “Taida 232cc Parts” has all the major components to assemble a complete GY6 232cc motor.  We recommend everything in this group as a minimum to convert a stock GY6 150 to big bore 232cc GY6.   Taida Watercool 67mm Big Bore Cylinder is also an available option.  Going water-cooled will require a custom radiator and water pump setup.

    “GY6 150cc Donor Motor Hardware”  This group will include all the miscellaneous hardware that is needed to assemble the motor like nuts, bolts, air shroud, flywheel, starter, etc. We use all BRAND NEW parts & hardware in our DROWsports GY6 Donor Package and hand-pick upgrades on all the parts that needed to be upgraded.  DROWsports GY6 Donor Kit has over $150.00 in upgrades. (See additional info

    “Engine Assemble Service” We at DROWsports take a lot of pride in our motor builds.  We measure and check everything from compression ratio to piston wall clearance before we assemble anything.  This is the only way to develop a powerful reliable motor.

    “ DROW Head Porting Service” We have been developing our head porting for a few years now and made lots of improvements over the years.  We highly recommend our ported head as a must-do upgrade. (Can take an additional 1-2 weeks)

    "Crankshaft Balancing & Truing Service"  We will balance the stroker crankshaft to the piston for better performance and reduce the harmonic of the crank. 

    "Treatment and Coating" WPC is a metal treatment option that we do to most of our motor builds.  WPC Treatment will increase the wear life and reduce friction on all treated surfaces.  (will take an additional week to complete)

    We offer Taida Black Powder Coated Engine Case. The powder coating is done by Taida with a Satin Black finish.

    “Final Drive Gears” Depending on your riding needs we recommend anything from a  2.71:1 to a 2.25:1.  Most stock GY6 gear ratio is about 3.07:1 we recommend a 2.25:1 For most street use.  If you want more torque or acceleration, you can choose a 2.38:1 or 2.46:1. 

    “Tuning Upgrades”  Performance parts upgrades, these parts will help you dial in the motor for your riding/racing needs.  Everything in this group can be added later. 

    International orders are welcome.  Email [email protected] for a shipping quote.

    DROWsports GY6 Donor Kit includes the following upgrades(ONLY OFFERED WITH COMPLETE MOTOR BUILD):

    • All Brand New Hardware (Nuts, bolts, transmission gear, brakes)
    • GY6 150 Short Axle 
    • GY6 Rear Wheel Axle Nut (M16x1.5)
    • GY6 Aluminum Performance Intake Manifold
    • GY6 150 Heavy Duty Starter Clutch (20 Roller) 
    • GY6 150 11 Pole Stator Assembly (AC)
    • GY6 Black Performance Cooling Fan
    • Gates Power Link Premium Drive Belt GY6 150 Long (842-20-30)
    • NGK Spark Plugs GY6 150 Motor (CR8HSA)
    • Premium Break-in Oil 
    More Information
    SKUTaida-GY6-232-Kit
    BrandTaida
    VehicleGY6 150cc
    Write Your Own Review
    You're reviewing:Taida GY6 150 232cc Engine Package with Taida Long Engine Case