{"title":"CBR 250\/300 Swap","description":"","products":[{"product_id":"aracer-rc-mini-x-honda-cb300-cbr300-rebel-300-cb300f","title":"aRacer RC Mini X - Honda CB300\/CBR300 Rebel 300 CB300F","description":"\u003cp\u003eThe Honda CBR250 CBR300 aRacer Mini X is now available! This brand-new ECU was made to increase performance and reliability for your bike! With this simple aRacer ECU, tuning has never been so easy! This product will allow users to tune for increased performance and speed without any modifications. The aRacer Mini X for the Honda CBR250 CBR300 comes with its own software that allows you to directly use your phone to make any necessary adjustments and tuning for your CBR300. You will just need to install the bLink Bluetooth module to your ECU and after that, you are good to go! \u003c\/p\u003e\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eIn order to use any additional modules aRacer 1 to 2 Cable is required.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNow connect to your mobile device via built-in wifi. \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/G4WQLg08rM4\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMonitor PRO\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMalfunction Code\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLog View\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMAPs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eQuick Burn\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eData Low\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLog View\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eEngine Calibration\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFuel\u003c\/li\u003e\n\u003cli\u003eFuel Base\u003c\/li\u003e\n\u003cli\u003eFuel Adj\u003c\/li\u003e\n\u003cli\u003eFuel Acc\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSpark (ignition timing)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSpark Angle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eEngine Setting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eIdle RPM\u003c\/li\u003e\n\u003cli\u003eRPM Limit\u003c\/li\u003e\n\u003cli\u003eVVA Control\u003c\/li\u003e\n\u003cli\u003eDec Fuel Cut\u003c\/li\u003e\n\u003cli\u003eAuto-Tune\u003c\/li\u003e\n\u003cli\u003eWB O2 CL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVehicle Setting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eQuick Shift\u003c\/li\u003e\n\u003cli\u003eSpeed Gain\u003c\/li\u003e\n\u003cli\u003eCoolant Fan\u003c\/li\u003e\n\u003cli\u003eTPS Learn\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMAPs Saving\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMAPs Sharing\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":49166149288220,"sku":"ASI-3102X","price":495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/aracer-mini-x-honda-cbr300.jpg?v=1718885924"},{"product_id":"aracer-af3-professional-wideband-with-bosch-lsu-4-9-o2-sensor-new","title":"aRacer AF3 Professional Wideband with Bosch LSU 4.9 O2 Sensor (NEW)","description":"\u003cp\u003eThe aRacer AF3 Professional AFR Module is the latest innovation in air-fuel ratio tuning, designed to plug directly into aRacer ECUs—no additional harness required. It features the new Bosch 4.9 wideband O2 sensor for exceptional accuracy and ultra-fast response times. The AF3 also supports the use of alcohol-based fuels including E30, E50, and E85, making it ideal for high-performance builds running alternative fuels. Whether you're tuning a Honda Grom, MSX125, or any motorcycle that needs precise AFR data, the AF3 is a must-have for smooth, optimized performance!\u003c\/p\u003e\n\u003cp\u003eaRacer AF3 AFR Module works in conjunction with the \u003ca href=\"https:\/\/www.drowsports.com\/aracer-dg1-multi-function-display\"\u003eaRacer DG-2\u003c\/a\u003e or\u003ca href=\"https:\/\/www.drowsports.com\/aracer-multi-function-display-sportd\"\u003e aRacer SportD\u003c\/a\u003e Multi-Function Display from aRacer with a 1 to 2 Harness.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eNEW AF3 Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFaster: Response +10% improvement vs AF2\u003c\/li\u003e\n\u003cli\u003eSupport the use of alcohol fuel: E30, E50 and E85\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEstimated high exhaust temperature warning (800c)\u003c\/li\u003e\n\u003cli\u003eAdvanced O2 Heating Control \u0026amp; Over Temperature Protection\u003c\/li\u003e\n\u003cli\u003eSupport Bosch LSU4.9 and LSU4.2 senors.\u003c\/li\u003e\n\u003cli\u003eDiagnostic for Module \u0026amp; Bosch O2 sensor\u003c\/li\u003e\n\u003cli\u003eSimpler: Simple Wire Connection (no longer require 1 to 2 cable)\u003c\/li\u003e\n\u003cli\u003eOnly supports RC Super X ,RC Mini X ECU, RC Mini XX, RC Super XX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNOTES: \u003c\/em\u003e\u003cem\u003eRequired M18 Oxygen Sensor Bung on exhaust. \u003c\/em\u003e See\u003ca href=\"https:\/\/www.drowsports.com\/weld-on-oxygen-sensor-stainless-steel-bung-cap-kit\"\u003e Weld-On Oxygen Sensor Bung\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have an older model aRacer ECU you will need to run the \u003ca href=\"https:\/\/www.drowsports.com\/products\/aracer-af2-professional-wideband-afr-module?_pos=3\u0026amp;_sid=5d290b3cf\u0026amp;_ss=r\"\u003eaRacer AF2 Wideband\u003c\/a\u003e. \u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":49166205223196,"sku":"ASI-0007-5","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/aracer-af3-wideband-auto-tuner.jpg?v=1747088851"},{"product_id":"oem-honda-oil-filter-for-rebel-300","title":"OEM Honda Oil Filter for CBR300, Rebel 300","description":"\u003cp dir=\"auto\"\u003eKeep your Honda motorcycle running smoothly with the genuine OEM Honda Oil Filter (15410-KYJ-902). Designed specifically for high-performance engines, this filter ensures optimal lubrication by removing contaminants and metallic particles from your engine oil, promoting longevity and reliability. It's a direct replacement for the earlier 15410-KYJ-901 model and provides a perfect factory fit for seamless installation during routine oil changes. Ideal for riders who demand the best in engine protection, this filter helps maintain peak performance on the road or trail.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eCompatibility:\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eThis oil filter is compatible with a range of Honda models, including but not limited to:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003ctable dir=\"auto\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth data-col-size=\"sm\"\u003eYear Range\u003c\/th\u003e\n\u003cth data-col-size=\"lg\"\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"sm\"\u003e2011-2023\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eHonda CBR250R \/ CBR300R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"sm\"\u003e2015-2023\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eHonda CB300F \/ CB300R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"sm\"\u003e2013-2023\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eHonda CRF250L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"sm\"\u003e2017-2023\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eHonda Rebel 300 (CMX300)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":49166293303580,"sku":"15410-KYJ-902","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/honda-rebel-300-oem-oil-filter-15410-kyj-902.jpg?v=1718887640"},{"product_id":"yuasa-honda-crf250r-maintenance-free-battery-ytx7lbs","title":"YUASA Honda CBR250R Maintenance Free Battery YTX7LBS","description":"\u003cp\u003eYUASA have been supplying the motorsports world with there batteries for years. The quality and technology used to make these batteries are top-notch and the list of industry clients who use their products is even more impressive. These maintenance-free batteries will give you peace of mind so you can stop worrying and just keep on riding.\u003c\/p\u003e\n\u003cp\u003eFittment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2020 Honda CBR300R\u003c\/li\u003e\n\u003cli\u003e2013-2020 Honda CRF250L\u003c\/li\u003e\n\u003cli\u003e2015-2018 Honda CB300F\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yuasa","offers":[{"title":"Default Title","offer_id":49166492303644,"sku":"YTX7LBS","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/yuasa_ytx7l-bs_cbr250r_battery.jpg?v=1718889105"},{"product_id":"chimera-engineering-silicone-radiator-hose-set-grom-w-cbr-radiator-black","title":"Chimera Engineering Silicone Radiator Hose Set - Grom w\/CBR Radiator - Black","description":"Chimera Engineering Silicone Radiator Hose Set for Honda Grom with CBR Radiator","brand":"Chimera","offers":[{"title":"Default Title","offer_id":49166824472860,"sku":"CH-1147-BLK","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/chimera-grom-cbr-300-radiator-hoses.jpg?v=1718891827"},{"product_id":"front-mount-radiator-for-grom-cbr-engine-swap","title":"Front Mount Radiator for Grom w\/CBR250 \/ 300 Engine Swap","description":"\u003cp dir=\"auto\"\u003eTake your Honda Grom CBR engine swap to the next level with this purpose-built Front Mount Radiator Kit. Engine swaps with CBR250R (MC41) or CBR300R (NC51\/CB300F) engines demand superior cooling — the stock Grom radiator simply can't handle the extra heat from 250–300cc of water-cooled power. This front-mount solution relocates the radiator to the optimal airflow position (forward of the engine, between the side panels) for maximum cooling efficiency, reduced temps, and bulletproof reliability on street, track, or spirited canyon rides.\u003cbr\u003eIncludes:\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003e1x NEW OEM Radiator\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e1x OEM Radiator Cap\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e3x rubber grommets\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e1x Radiator Stay\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003eM6x20 Nut and Bolt\u003cbr\u003e\u003cbr\u003eNOTE: Trimming the inner shroud plastic would be needed to clear the radiator.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":49166824603932,"sku":"HND-1095","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/honda-grom-cbr300-swap-radiator.jpg?v=1718891841"},{"product_id":"chimera-v2-honda-grom-cbr300-swap-kit","title":"Chimera V2 Honda Grom Monkey CBR300 Swap Mount","description":"\u003cp dir=\"auto\"\u003eThe Chimera V2 CBR Engine Swap Mount Kit is the most advanced, lightest, and easiest way to drop a reliable Honda NC51 (CBR300\/CB300\/Rebel 300) or MC41 (CBR250\/CRF250) engine into your Honda Grom.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eWhether you ride a 2014-2020 Grom or the all-new 2022-2025 generation, the V2 kit gives you bolt-on installation with zero frame welding on either model. Enjoy smooth, water-cooled power, a real 6-speed transmission, and dramatically improved acceleration and top speed while keeping the lightweight Grom chassis you love.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe all-new V2 design is 25% lighter than the original (just 1.8 lbs) and uses a dual-stacked plate system that eliminates the harmonic vibration issues that cause frame cracks in single-piece designs from other brands. We also added extra clearance between the lower frame and engine for a cleaner fit on both Grom generations.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eReversible on 2014-2020 models — swap back to your stock 125cc engine anytime. 2022-2025 models install just as cleanly with the updated V2 brackets engineered specifically for the revised frame.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eHonda Grom: 2014-2020 (all generations)\u003c\/li\u003e\n\u003cli\u003eHonda Grom: 2022-2025 (new-generation frame)\u003c\/li\u003e\n\u003cli\u003eEngines: Honda CBR300\/CB300F\/Rebel 300 (NC51) or CBR250 (MC41)\u003c\/li\u003e\n\u003cli\u003eNote: Not compatible with Monkey models (separate kit available)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eRequired Additional Parts (Sold Separately):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eChimera CNC Billet Intake Manifold or Silicone Coupler Elbow\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRace Header\u003c\/li\u003e\n\u003cli\u003eFront-Mount Radiator + Radiator Hose Kit\u003c\/li\u003e\n\u003cli\u003eAftermarket ECU (highly recommended: ARacer RC Mini-X or Super X)\u003c\/li\u003e\n\u003cli\u003eWiring harness from CBR300 donor bike or Wicked Harness recommended.\u003c\/li\u003e\n\u003cli\u003eSprockets, chain, coolant overflow tank, EGR block-off plate, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eImportant Notes \u0026amp; Warnings:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eChain guide uses bearings — expect normal whirring noise under engine braking.\u003c\/li\u003e\n\u003cli\u003eThe massive power increase will make the bike wheelie easily — off-road use only!\u003c\/li\u003e\n\u003cli\u003e2017+ stock LED headlight may require a Tripage adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eReady to build the ultimate Grom? This is the cleanest, strongest, and lightest CBR300 swap mount on the market. Grab your Chimera V2 kit today and transform your ride!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Chimera","offers":[{"title":"2014-2020","offer_id":51121810374940,"sku":"CH-1112","price":245.0,"currency_code":"USD","in_stock":true},{"title":"2022+","offer_id":51121810407708,"sku":"CH-1374","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/chimera--v2-cbr-engine-swap-kit-honda-grom-2014-2020-monkey-2018-2021.jpg?v=1773877626"},{"product_id":"oem-honda-cbr250-300-crankcase-cover-gasket","title":"OEM Honda CBR250 \/ 300 Crankcase Cover Gasket","description":"\u003ch3 data-start=\"104\" data-end=\"159\"\u003eOEM Honda Left Crankcase Gasket – CBR250 \/ CBR300\u003c\/h3\u003e\n\u003cp data-start=\"161\" data-end=\"481\"\u003eEnsure a perfect seal and factory reliability with the OEM Honda Left Crankcase Gasket for CBR250R and CBR300Rmodels. Designed to meet Honda’s exact specifications, this genuine replacement gasket provides a precise fit, maintaining proper oil containment and preventing leaks in your engine assembly.\u003c\/p\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCBR250R 2011-13\u003c\/li\u003e\n\u003cli\u003eCB300F CBR300 2015-21\u003c\/li\u003e\n\u003cli\u003eCRF250L 2013-20\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":51302414483740,"sku":"11395-KYJ-900","price":6.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/honda-cbr-250-300-left-side-gasket.jpg?v=1740096636"},{"product_id":"oem-honda-cbr250-300-right-crankcase-cover-gasket","title":"OEM Honda CBR250 \/ 300 Right Crankcase Clutch Cover Gasket","description":"\u003cp data-end=\"421\" data-start=\"157\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eOEM Honda Right Side Clutch Cover Gasket – CBR300\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"421\" data-start=\"157\"\u003eMaintain a factory-tight seal with the OEM Honda Right Side Clutch Cover Gasket for CBR300R models. Designed to Honda’s exact specifications, this genuine replacement gasket ensures a precise fit, preventing oil leaks and preserving engine integrity.\u003c\/p\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCBR250R 2011-13\u003c\/li\u003e\n\u003cli\u003eCB300F CBR300 2015-21\u003c\/li\u003e\n\u003cli\u003eCRF250L 2013-20\u003c\/li\u003e\n\u003cli\u003e11394-K87-A30\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":51302496141596,"sku":"11394-K87-A30","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/honda-cbr-300-250-clutch-cover-gasket.jpg?v=1740098171"},{"product_id":"wicked-grom-cbr-conversion-adapter-kit-with-manual-air-idle-control-grom","title":"Wicked-Grom  CBR Conversion Adapter Kit for Grom \u0026 Monkey 125","description":"\u003ch6 data-end=\"129\" data-start=\"73\"\u003eCBR to Grom\/Monkey Complete Conversion Adapter Kit with CBR Manual Air Idle Control \u003c\/h6\u003e\n\u003cp class=\"\" data-end=\"452\" data-start=\"131\"\u003eLooking to swap a CBR250\/300 or CB300 motor into your Honda Grom or Monkey while keeping the factory Grom wiring? This \u003cstrong data-end=\"265\" data-start=\"250\"\u003ePlug \u0026amp; Play\u003c\/strong\u003e conversion adapter kit makes it easy! Designed for seamless integration, this kit includes all the necessary adapters to connect your CBR\/CB engine to your Grom’s stock wiring harness.\u003c\/p\u003e\n\u003ch6 data-end=\"477\" data-start=\"454\"\u003e\u003cstrong data-end=\"475\" data-start=\"458\"\u003eKey Features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli data-end=\"746\" data-start=\"478\"\u003e\n\u003cstrong data-end=\"513\" data-start=\"480\"\u003eComplete Plug \u0026amp; Play Solution\u003c\/strong\u003e – No splicing or complicated wiring required\u003c\/li\u003e\n\u003cli data-end=\"746\" data-start=\"478\"\u003e\n\u003cstrong data-end=\"603\" data-start=\"563\"\u003eSupports CBR250\/CBR300\/CB300 Engines\u003c\/strong\u003e – Compatible with 2011+ Honda CBR250\/300 \u0026amp; CB300 motors\u003cbr data-end=\"662\" data-start=\"659\"\u003e\u003cstrong data-end=\"695\" data-start=\"664\"\u003e\u003c\/strong\u003e\u003cstrong data-end=\"695\" data-start=\"664\"\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"746\" data-start=\"478\"\u003e\n\u003cstrong data-end=\"695\" data-start=\"664\"\u003eRetains Factory Grom Wiring\u003c\/strong\u003e – No need for extensive electrical modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"899\" data-start=\"866\"\u003eCBR manual idle control valve\u003c\/strong\u003e for the CBR throttle body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6 data-end=\"774\" data-start=\"748\"\u003e\u003cstrong data-end=\"772\" data-start=\"752\"\u003eImportant Notes:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli data-end=\"1020\" data-start=\"775\"\u003eRequires a \u003cstrong data-end=\"814\" data-start=\"789\"\u003eGrom Aracer ECU \u0026amp; AF3\u003c\/strong\u003e for proper tuning and operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1020\" data-start=\"775\"\u003eWill need to use Grom 125 Map  and Auto tune after\u003c\/li\u003e\n\u003cli data-end=\"1020\" data-start=\"775\"\u003eIncludes CBR Manual Idle control valve for the CBR Throttle Body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"\" data-end=\"1089\" data-start=\"1022\"\u003eSwap your engine the right way with this hassle-free adapter kit!\u003c\/p\u003e","brand":"Wicked Grom","offers":[{"title":"2014-2020 Grom 125 \/ Add Manual Air Idle Control","offer_id":51562558062876,"sku":"WG-1001, WG-2004","price":185.0,"currency_code":"USD","in_stock":true},{"title":"2014-2020 Grom 125 \/ No Manual Air Idle Control","offer_id":54259804766492,"sku":"WG-1001","price":159.0,"currency_code":"USD","in_stock":true},{"title":"2022-2025 Grom 125 \/ Add Manual Air Idle Control","offer_id":51562558095644,"sku":"WG-1002, WG-2004","price":185.0,"currency_code":"USD","in_stock":true},{"title":"2022-2025 Grom 125 \/ No Manual Air Idle Control","offer_id":54259804799260,"sku":"WG-1002","price":159.0,"currency_code":"USD","in_stock":true},{"title":"2019-2020 Monkey 125 \/ Add Manual Air Idle Control","offer_id":52568721162524,"sku":"WG-1003, WG-2004","price":185.0,"currency_code":"USD","in_stock":true},{"title":"2019-2020 Monkey 125 \/ No Manual Air Idle Control","offer_id":54259804832028,"sku":"WG-1003","price":159.0,"currency_code":"USD","in_stock":true},{"title":"2022-2022 Monkey 125 \/ Add Manual Air Idle Control","offer_id":52568721195292,"sku":"WG-1004, WG-2004","price":185.0,"currency_code":"USD","in_stock":true},{"title":"2022-2022 Monkey 125 \/ No Manual Air Idle Control","offer_id":54259804864796,"sku":"WG-1004","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/wicked-grom-cbr-300-jumper.jpg?v=1743205628"},{"product_id":"wickedgrom-cbr-intake-manifold-injector-elbow-1","title":"Wicked Grom CBR Intake Manifold Injector Elbow","description":"\u003cp\u003e\u003cb\u003eCBR Injector Relocation Elbow\/Manifold for Honda Grom \u0026amp; Monkey (CBR Swap)\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your CBR-swapped Honda Grom or Monkey with this Injector Relocation Elbow\/Manifold, designed to reposition the fuel injector from the throttle body to a location closer to the OEM setup. This optimized placement enhances fuel atomization, improving throttle response, horsepower, and overall engine efficiency.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality carbon fiber nylon, this manifold is built to withstand extreme heat and stress—won’t crack, melt, or degrade over time.\u003c\/p\u003e\n\u003cp\u003e*LIFETIME Warranty included with all our in house 3d printed products*\u003c\/p\u003e\n\u003cp\u003eFits: CBR300R, CBR250R, CB300F \u0026amp; CB300R motors being swapped into 2014-2023 Honda Groms \u0026amp; Honda Monkeys.\u003c\/p\u003e\n\u003cp\u003eKit Content:\u003c\/p\u003e\n\u003cp\u003eWickedGrom Intake Manifold for CB\/CBR 250\/300 swapped Honda Grom.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle Body Injector plug.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e4x Stainless Steel Screws\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eCoupler \u0026amp; Clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wicked Grom","offers":[{"title":"Default Title","offer_id":51683333767452,"sku":"WG-2001","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/wicked-grom-cbr-250-300-swap-intake-manifold.jpg?v=1744763682"},{"product_id":"wickedgrom-cbr-intake-manifold-no-cut-elbow","title":"Wicked Grom CBR Intake Elbow No-Cut","description":"\u003cp data-start=\"145\" data-end=\"473\" class=\"\"\u003eSay goodbye to cutting your plastics! The No-Cut Elbow is designed specifically for CBR-swapped Honda Groms and Monkeys, repositioning the throttle body to face forward—allowing for a clean, stealthy install. It works perfectly with our swap air filter, tucking everything neatly under your factory plastics for a seamless look.\u003c\/p\u003e\n\u003cp data-start=\"475\" data-end=\"598\" class=\"\"\u003eBuilt from high-quality, heat-resistant material, this elbow is engineered to last—won’t crack, melt, or degrade over time.\u003c\/p\u003e\n\u003cp data-start=\"600\" data-end=\"745\" class=\"\"\u003e\u003cstrong data-start=\"600\" data-end=\"618\"\u003eCompatibility:\u003c\/strong\u003e\u003cbr data-start=\"618\" data-end=\"621\"\u003eFits all injector elbows currently on the market for the following engines swapped into 2014–2023 Honda Groms and Monkeys:\u003c\/p\u003e\n\u003cul data-start=\"746\" data-end=\"789\"\u003e\n\u003cli data-start=\"746\" data-end=\"757\" class=\"\"\u003e\n\u003cp data-start=\"748\" data-end=\"757\" class=\"\"\u003eCBR300R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"758\" data-end=\"769\" class=\"\"\u003e\n\u003cp data-start=\"760\" data-end=\"769\" class=\"\"\u003eCBR250R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"770\" data-end=\"780\" class=\"\"\u003e\n\u003cp data-start=\"772\" data-end=\"780\" class=\"\"\u003eCB300F\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"781\" data-end=\"789\" class=\"\"\u003e\n\u003cp data-start=\"783\" data-end=\"789\" class=\"\"\u003eCB300R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wicked Grom","offers":[{"title":"Default Title","offer_id":51692589646108,"sku":"WG-2002","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/wicked-grom-crb-250-300-intake-elbow.jpg?v=1744845665"},{"product_id":"superlite-chromoly-428-conversion-front-sprocket-honda-cbr250-300","title":"Superlite Chromoly 428 Conversion Front Sprocket  Honda CBR250 \/ 300","description":"\u003cp data-start=\"141\" data-end=\"231\" class=\"\"\u003e\u003cstrong data-start=\"141\" data-end=\"231\"\u003eSuperlite \"Xtreme Duty\" 428 Front Sprocket – Engineered for Performance and Durability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"233\" data-end=\"570\" class=\"\"\u003eTake your build to the next level with the Superlite \"Xtreme Duty\" front sprocket, designed to deliver the ultimate combination of lightweight performance and exceptional strength. Precision-engineered from case-hardened chromoly steel, these sprockets are manufactured to exact tolerances for a perfect fit and long-lasting reliability.\u003c\/p\u003e\n\u003cp data-start=\"572\" data-end=\"873\" class=\"\"\u003eSuperlite’s exclusive tooth profile ensures smoother engagement and less wear compared to other brands. Most sprockets feature strategically drilled holes to reduce rotating mass without compromising structural integrity—ideal for everything from lightweight race machines to high-torque engine swaps.\u003c\/p\u003e\n\u003cp data-start=\"875\" data-end=\"938\" class=\"\"\u003e\u003cstrong data-start=\"875\" data-end=\"938\"\u003ePerfect for custom builds and race applications, including:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"939\" data-end=\"1059\"\u003e\n\u003cli data-start=\"939\" data-end=\"976\" class=\"\"\u003e\n\u003cp data-start=\"941\" data-end=\"976\" class=\"\"\u003eLightweight 428 pitch conversions\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1001\" data-end=\"1059\" class=\"\"\u003e\n\u003cp data-start=\"1003\" data-end=\"1059\" class=\"\"\u003eHonda Grom engine swaps using CBR250 or CBR300 engines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1061\" data-end=\"1219\" class=\"\"\u003eWhether you're building a track weapon or a high-performance street setup, Superlite front sprockets are the go-to choice for serious tuners and racers alike.\u003c\/p\u003e\n\u003cdiv class=\"tt-item active\"\u003e\n\u003cdiv class=\"tt-collapse-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2012-2018 Honda CRF 250L\u003c\/li\u003e\n\u003cli\u003e2016-2020 Honda Rebel 300\u003c\/li\u003e\n\u003cli\u003e2011-2013 Honda CBR 250R\u003c\/li\u003e\n\u003cli\u003e2013-2019 CBR 300R\u003c\/li\u003e\n\u003cli\u003e2013-2019 Honda CB 300F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Superlite","offers":[{"title":"15T","offer_id":51692779110684,"sku":"20320RX-15","price":22.95,"currency_code":"USD","in_stock":true},{"title":"16T","offer_id":51692779143452,"sku":"20320RX-16","price":22.95,"currency_code":"USD","in_stock":true},{"title":"17T","offer_id":51692779176220,"sku":"20320RX-17","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/cbr300-cbr250r-428-front-sprocket-17t-16t-15t.jpg?v=1746745690"},{"product_id":"smr-factory-5pc-clutch-spring-upgrade-60-stiffer-honda-rebel-300-cbr300","title":"SMR Factory 5pc Clutch Spring Upgrade 60% Stiffer - Honda Rebel 300 CBR300","description":"\u003cp data-start=\"215\" data-end=\"635\" class=\"\"\u003eLooking to get more bite out of your clutch without jumping straight into a full clutch kit? The SMR Factory 5pc Clutch Spring Upgrade is the perfect solution for riders looking to handle increased power, aggressive riding, or simply improve overall clutch feel. These springs offer \u003cstrong data-start=\"498\" data-end=\"520\"\u003e60% more stiffness\u003c\/strong\u003e over the stock setup, delivering firmer engagement and reduced clutch slippage—especially under hard acceleration.\u003c\/p\u003e\n\u003cp data-start=\"637\" data-end=\"978\" class=\"\"\u003eDesigned specifically for the \u003cstrong data-start=\"667\" data-end=\"686\"\u003eHonda Rebel 300\u003c\/strong\u003e and \u003cstrong data-start=\"691\" data-end=\"701\"\u003eCBR300\u003c\/strong\u003e, this direct-fit upgrade is ideal for modified or even stock engines that are pushed harder than factory conditions intended. Whether you're hitting the canyons, commuting daily, or doing weekend track days, this upgrade gives you the confidence and performance edge you need.\u003c\/p\u003e\n\u003cp data-start=\"980\" data-end=\"993\" class=\"\"\u003e\u003cstrong data-start=\"980\" data-end=\"993\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"994\" data-end=\"1314\"\u003e\n\u003cli data-start=\"994\" data-end=\"1031\" class=\"\"\u003e\n\u003cp data-start=\"996\" data-end=\"1031\" class=\"\"\u003e60% stiffer than OEM clutch springs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1032\" data-end=\"1093\" class=\"\"\u003e\n\u003cp data-start=\"1034\" data-end=\"1093\" class=\"\"\u003eIncreased clutch holding power for improved torque transfer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1094\" data-end=\"1140\" class=\"\"\u003e\n\u003cp data-start=\"1096\" data-end=\"1140\" class=\"\"\u003eIdeal for high-load or high-RPM applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1141\" data-end=\"1180\" class=\"\"\u003e\n\u003cp data-start=\"1143\" data-end=\"1180\" class=\"\"\u003eHelps reduce clutch fade and slippage\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1181\" data-end=\"1257\" class=\"\"\u003e\n\u003cp data-start=\"1183\" data-end=\"1257\" class=\"\"\u003eDirect drop-in fit for Honda Rebel 300 \/ CBR300 (no modification required)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1258\" data-end=\"1314\" class=\"\"\u003e\n\u003cp data-start=\"1260\" data-end=\"1314\" class=\"\"\u003eIncludes 5 heavy-duty springs for complete replacement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1316\" data-end=\"1328\" class=\"\"\u003e\u003cstrong data-start=\"1316\" data-end=\"1328\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1329\" data-end=\"1373\"\u003e\n\u003cli data-start=\"1329\" data-end=\"1348\" class=\"\"\u003e\n\u003cp data-start=\"1331\" data-end=\"1348\" class=\"\"\u003eHonda Rebel 300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1349\" data-end=\"1373\" class=\"\"\u003e\n\u003cp data-start=\"1351\" data-end=\"1373\" class=\"\"\u003eHonda CBR300R \/ CBR300\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SMR Factory","offers":[{"title":"Default Title","offer_id":51811237396764,"sku":"SMR-1043","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/smr-cbr250-cbr300-clutch-spring-upgrade.jpg?v=1746661296"},{"product_id":"smr-factory-6-disc-clutch-upgrade-set-for-honda-cb250r-cbr300r-cb300f-cb300r","title":"SMR Factory 6-Disc Clutch upgrade set for  Honda CB250R CBR300R CB300F CB300R","description":"\u003cp data-start=\"261\" data-end=\"640\" class=\"\"\u003eTake your clutch performance to the next level with the \u003cstrong data-start=\"317\" data-end=\"358\"\u003eSMR Factory 6-Disc Clutch Upgrade Set\u003c\/strong\u003e, designed specifically for Honda’s 250cc–300cc single-cylinder platforms. Whether you’re riding aggressively on the street, pushing your bike on the track, or running a modified engine, this upgrade adds extra friction material to handle more torque and reduce slippage under load.\u003c\/p\u003e\n\u003cp data-start=\"642\" data-end=\"937\" class=\"\"\u003eUnlike the stock 5-disc setup, this kit increases the clutch surface area by adding a 6th friction plate—giving you stronger engagement, improved durability, and a more consistent feel throughout the rev range. Pair it with stiffer springs (sold separately) for a complete clutch transformation.\u003c\/p\u003e\n\u003cp data-start=\"939\" data-end=\"952\" class=\"\"\u003e\u003cstrong data-start=\"939\" data-end=\"952\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"953\" data-end=\"1323\"\u003e\n\u003cli data-start=\"953\" data-end=\"1013\" class=\"\"\u003e6-disc configuration for increased friction surface area\u003c\/li\u003e\n\u003cli data-start=\"1014\" data-end=\"1058\" class=\"\"\u003eImproved clutch bite and torque capacity\u003c\/li\u003e\n\u003cli data-start=\"1059\" data-end=\"1120\" class=\"\"\u003eReduces clutch fade and slip under heavy load or high RPM\u003c\/li\u003e\n\u003cli data-start=\"1121\" data-end=\"1171\" class=\"\"\u003eIdeal for modified or high-performance engines\u003c\/li\u003e\n\u003cli data-start=\"1172\" data-end=\"1252\" class=\"\"\u003eDirect fit for Honda CB250R, CBR300R, CB300F, CMX300 (Rebel 300), and CB300R\u003c\/li\u003e\n\u003cli data-start=\"1253\" data-end=\"1323\" class=\"\"\u003eIncludes friction plates and steel drive plates for complete install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1325\" data-end=\"1337\" class=\"\"\u003e\u003cstrong data-start=\"1325\" data-end=\"1337\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1338\" data-end=\"1435\"\u003e\n\u003cli data-start=\"1338\" data-end=\"1354\" class=\"\"\u003eHonda CB250R\u003c\/li\u003e\n\u003cli data-start=\"1355\" data-end=\"1372\" class=\"\"\u003eHonda CBR300R\u003c\/li\u003e\n\u003cli data-start=\"1373\" data-end=\"1389\" class=\"\"\u003eHonda CB300F\u003c\/li\u003e\n\u003cli data-start=\"1390\" data-end=\"1418\" class=\"\"\u003eHonda CMX300 (Rebel 300)\u003c\/li\u003e\n\u003cli data-start=\"1419\" data-end=\"1435\" class=\"\"\u003eHonda CB300R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SMR Factory","offers":[{"title":"Default Title","offer_id":51811310174492,"sku":"SMR-1019","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/smr-6-disc-cbr250-cbr300-cb300f-clutch-upgrade.jpg?v=1746662801"},{"product_id":"driven-racing-engine-block-off-plate-honda-cbr250r-cbr300r-crf250l-2011-2020","title":"Driven Racing Engine Block Off Plate Honda CBR250R \/ CBR300R \/ CRF250L 2011-2020","description":"\u003cp data-start=\"209\" data-end=\"584\"\u003eClean up your engine bay and eliminate unnecessary emissions clutter with the Driven Racing EGR (Exhaust Gas Recirculation) Block-Off Plate for the Honda CBR300 series. Designed specifically for performance enthusiasts and tuners, this block-off plate lets you remove the factory EGR system, helping to reduce engine bay heat and prevent carbon build-up in the intake system.\u003c\/p\u003e\n\u003cp data-start=\"586\" data-end=\"903\"\u003eCNC-machined from high-quality aluminum and finished with Driven's signature anodizing, this block-off plate is lightweight, corrosion-resistant, and built to last. Whether you're upgrading for a cleaner engine setup or prepping for a race build, this is a must-have part for a simplified and efficient engine system.\u003c\/p\u003e\n\u003cp data-start=\"905\" data-end=\"918\"\u003e\u003cstrong data-start=\"905\" data-end=\"918\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"919\" data-end=\"1185\"\u003e\n\u003cli data-start=\"919\" data-end=\"969\"\u003e\n\u003cp data-start=\"921\" data-end=\"969\"\u003eDirect fit for Honda CBR300R, CB300F, and CB300R\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"970\" data-end=\"1006\"\u003e\n\u003cp data-start=\"972\" data-end=\"1006\"\u003eCNC-machined aluminum construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1007\" data-end=\"1049\"\u003e\n\u003cp data-start=\"1009\" data-end=\"1049\"\u003eAnodized finish for durability and style\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1050\" data-end=\"1107\"\u003e\n\u003cp data-start=\"1052\" data-end=\"1107\"\u003eHelps reduce engine bay heat and intake carbon build-up\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1108\" data-end=\"1167\"\u003e\n\u003cp data-start=\"1110\" data-end=\"1167\"\u003eIdeal for performance builds and emissions system removal\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1187\" data-end=\"1317\"\u003e\u003cstrong data-start=\"1187\" data-end=\"1196\"\u003eNote:\u003c\/strong\u003e For \u003cem data-start=\"1201\" data-end=\"1233\"\u003erace or closed-course use only\u003c\/em\u003e. Not intended for use on public roads where emissions equipment is required by law.\u003c\/p\u003e","brand":"Driven Racing","offers":[{"title":"Default Title","offer_id":52361057927452,"sku":"DSBLOCK-18","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/driven-racing-honda-cbr300-cbr250-egr-black-off-plate.jpg?v=1752182321"},{"product_id":"oem-honda-crb300-exhaust-gasket","title":"OEM Honda CRB300 Exhaust Gasket","description":"\u003cp data-start=\"146\" data-end=\"426\"\u003eKeep your Honda running smoothly with a genuine \u003cstrong data-start=\"194\" data-end=\"216\"\u003eOEM exhaust gasket\u003c\/strong\u003e designed specifically for the \u003cstrong data-start=\"247\" data-end=\"263\"\u003eHonda CBR300\u003c\/strong\u003e. This gasket ensures a proper seal between the exhaust header and cylinder head, preventing leaks, maintaining backpressure, and preserving optimal performance.\u003c\/p\u003e\n\u003cp data-start=\"428\" data-end=\"698\"\u003eUnlike aftermarket options, this Honda original part guarantees perfect fitment, long-lasting durability, and peace of mind. It’s always recommended to replace the gasket whenever removing or reinstalling your exhaust system to avoid air leaks and maintain efficiency.\u003c\/p\u003e\n\u003cp data-start=\"700\" data-end=\"719\"\u003e\u003cstrong data-start=\"700\" data-end=\"717\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"720\" data-end=\"998\"\u003e\n\u003cli data-start=\"720\" data-end=\"774\"\u003e\n\u003cp data-start=\"722\" data-end=\"774\"\u003eGenuine \u003cstrong data-start=\"730\" data-end=\"748\"\u003eOEM Honda part\u003c\/strong\u003e (Part #: 18291-MEB-670)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"775\" data-end=\"831\"\u003e\n\u003cp data-start=\"777\" data-end=\"831\"\u003eEnsures a proper seal for maximum exhaust efficiency\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"832\" data-end=\"891\"\u003e\n\u003cp data-start=\"834\" data-end=\"891\"\u003ePrevents exhaust leaks and maintains engine performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"892\" data-end=\"935\"\u003e\n\u003cp data-start=\"894\" data-end=\"935\"\u003eDirect replacement for the stock gasket\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"936\" data-end=\"998\"\u003e\n\u003cp data-start=\"938\" data-end=\"998\"\u003eRecommended replacement during exhaust service or upgrades\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1000\" data-end=\"1014\"\u003e\u003cstrong data-start=\"1000\" data-end=\"1012\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1015\" data-end=\"1084\"\u003e\n\u003cli\u003eHonda CBR300R \u003c\/li\u003e\n\u003cli data-start=\"1015\" data-end=\"1084\"\u003eHonda CBR250R\u003c\/li\u003e\n\u003cli data-start=\"1015\" data-end=\"1084\"\u003eHonda CRF450X\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":52797371449628,"sku":"18291-MEB-670","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/honda-cbr250-cbr300-exhaust-gasket-18291-MEB-670.jpg?v=1755627993"},{"product_id":"m6-metric-stainless-steel-socket-cap-screw","title":"M6 Metric Stainless Steel Socket Head Cap Screw","description":"\u003cp dir=\"auto\"\u003e\u003cstrong\u003ePremium M6 Stainless Steel Socket Head Cap Screws – Precision Fastening from 10mm to 90mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eEngineered for demanding applications, our \u003cstrong\u003eM6 Metric Socket Head Cap Screws\u003c\/strong\u003e are manufactured from high-grade \u003cstrong\u003e \u003c\/strong\u003eStainless Steel. These professional-grade fasteners combine exceptional corrosion resistance with superior tensile strength, making them the go-to choice for both indoor and harsh outdoor environments.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eFeaturing a cylindrical socket head and internal hex drive, they deliver a clean, low-profile finish while allowing high clamping force with standard Allen keys or hex bits. Available in every length from 10mm to 90mm, you can select the exact size your project requires without compromise.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: A2-70 (304) Stainless Steel – Rust \u0026amp; corrosion resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread\u003c\/strong\u003e: M6 coarse (1.0mm pitch) – Full thread up to 50mm, partial thread on longer sizes per DIN 912\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Socket \/ Cylinder Head (ISO 4762 \/ DIN 912 standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive\u003c\/strong\u003e: Hex socket (Allen) – Prevents cam-out, allows higher torque\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths Available\u003c\/strong\u003e: 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright \/ Self-color (passivated for extra protection)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DROWsports","offers":[{"title":"M6x10mm","offer_id":53899450843420,"sku":null,"price":0.2,"currency_code":"USD","in_stock":false},{"title":"M6x12mm","offer_id":53899450876188,"sku":null,"price":0.2,"currency_code":"USD","in_stock":false},{"title":"M6x14mm","offer_id":53899450908956,"sku":null,"price":0.2,"currency_code":"USD","in_stock":true},{"title":"M6x16mm","offer_id":53899450941724,"sku":null,"price":0.25,"currency_code":"USD","in_stock":true},{"title":"M6x18mm","offer_id":53899450974492,"sku":null,"price":0.25,"currency_code":"USD","in_stock":false},{"title":"M6x20mm","offer_id":53899451007260,"sku":null,"price":0.25,"currency_code":"USD","in_stock":true},{"title":"M6x25mm","offer_id":53899451040028,"sku":null,"price":0.25,"currency_code":"USD","in_stock":true},{"title":"M6x30mm","offer_id":53899451072796,"sku":null,"price":0.3,"currency_code":"USD","in_stock":true},{"title":"M6x35mm","offer_id":53899451105564,"sku":null,"price":0.35,"currency_code":"USD","in_stock":true},{"title":"M6x40mm","offer_id":53899451138332,"sku":null,"price":0.4,"currency_code":"USD","in_stock":true},{"title":"M6x45mm","offer_id":53899451171100,"sku":null,"price":0.45,"currency_code":"USD","in_stock":true},{"title":"M6x50mm","offer_id":53899451203868,"sku":null,"price":0.55,"currency_code":"USD","in_stock":false},{"title":"M6x55mm","offer_id":53899451236636,"sku":null,"price":0.6,"currency_code":"USD","in_stock":true},{"title":"M6x60mm","offer_id":53899451269404,"sku":null,"price":0.65,"currency_code":"USD","in_stock":true},{"title":"M6x65mm","offer_id":53899451302172,"sku":null,"price":0.7,"currency_code":"USD","in_stock":true},{"title":"M6x70mm","offer_id":53899451334940,"sku":null,"price":0.8,"currency_code":"USD","in_stock":false},{"title":"M6x75mm","offer_id":53899451367708,"sku":null,"price":0.8,"currency_code":"USD","in_stock":false},{"title":"M6x80mm","offer_id":53899451400476,"sku":null,"price":0.87,"currency_code":"USD","in_stock":false},{"title":"M6x90mm","offer_id":53899451433244,"sku":null,"price":1.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/m6-stainless-steel-cap-socket-screw.jpg?v=1772235672"},{"product_id":"motion-pro-275cc-coolant-recovery-tank","title":"Motion Pro 275cc Coolant Recovery Tank","description":"\u003cp dir=\"auto\"\u003eEnhance your motorcycle's cooling system with the Motion Pro 275cc Coolant Recovery Tank, ideal for CBR-swapped Honda Groms or any water-cooled setup. This universal tank prevents coolant loss due to overheating, making it perfect for hot weather, high-altitude conditions, or demanding rides like slow-speed technical trails. Crafted for reliability, it captures excess coolant expansion and returns it to the system as it cools, ensuring consistent performance without messy overflows. Whether you're customizing a Grom with a CBR engine swap or upgrading any water-cooled motorcycle, ATV, or snowmobile, this tank delivers a simple, effective solution for maintaining optimal coolant levels and engine health.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eSpecifications\u003c\/h4\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e: 275cc (9.3 fl. oz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-density polyethylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: Height (with cap) 5.5\" x Width 3.75\" x Depth 1.875\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Universal for water-cooled systems; commonly used in Honda Grom CBR engine swaps and similar custom builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components\u003c\/strong\u003e: Tank, hose, clamps, zip ties, and installation instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number\u003c\/strong\u003e: 11-0099\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motion Pro","offers":[{"title":"Default Title","offer_id":53929145860380,"sku":"11-0099","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/Motion-Pro-275cc-Coolant-Recovery-Tank.jpg?v=1771438830"},{"product_id":"counteract-balancing-bead-diy-kit","title":"Counteract Balancing Bead DIY Kit","description":"\u003cp dir=\"auto\"\u003eSmall 12\" wheels on the \u003cstrong\u003eYamaha Zuma 125\u003c\/strong\u003e and \u003cstrong\u003eHonda Grom 125\u003c\/strong\u003e are super sensitive to imbalance — every tiny road imperfection gets transmitted straight to your hands and seat. Stop fighting vibrations and install \u003cstrong\u003eCounteract Balancing Beads\u003c\/strong\u003e — the internal, automatic balancing solution that works at any speed, from stop-and-go city traffic to 60–80+ mph on modified bikes.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis \u003cstrong\u003e2-Pack of 2oz bags\u003c\/strong\u003e is the perfect match for your stock (or upgraded) 120\/70-12 and 130\/70-12 tires. The micro-fine tempered glass beads roll to the lightest spots inside the tire as you ride, continuously balancing the \u003cstrong\u003eentire wheel assembly\u003c\/strong\u003e (tire + rim + hub + brake) for the life of the tire. No ugly external weights, no re-balancing every time you change tires, and no more high-speed wobbles that plague mini bikes and scooters.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eWhether you daily your Zuma for commuting, rip canyons on your Grom, or have a big-bore\/exhaust setup pushing higher speeds, these beads deliver a noticeably smoother, more planted ride with less fatigue and better handling.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact 2oz per tire\u003c\/strong\u003e for 12\" mini-bike tires (120–130mm widths) — matches Counteract’s official motorcycle chart for Zuma 125 \u0026amp; Grom 125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks at any speed\u003c\/strong\u003e — balances from 0 mph (unlike stick-on weights that only work above 30 mph)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates vibration on small 12\" wheels\u003c\/strong\u003e — dramatically smoother ride and reduced hand\/foot numbness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 30% longer tire life\u003c\/strong\u003e \u0026amp; 2–5% better fuel economy (real-world on scooters \u0026amp; mini bikes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for modified Zuma\/Grom builds\u003c\/strong\u003e — big-bore kits, performance exhausts, and taller gearing all benefit from perfect balance at higher speeds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, professional look\u003c\/strong\u003e — no visible weights on your custom wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003ePerfect Fitment For\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Zuma 125\u003c\/strong\u003e (2009–2026 models — all 12\" wheel versions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonda Grom 125 \/ MSX125\u003c\/strong\u003e (all years 2014–2026)\u003c\/li\u003e\n\u003cli\u003eHonda Ruckus, Metropolitan, Elite, Monkey, Super Cub (12\" wheel models)\u003c\/li\u003e\n\u003cli\u003eOther mini bikes \u0026amp; scooters with 120–130mm wide 12\" tires\u003c\/li\u003e\n\u003cli\u003eAlways confirm exact tire size, but 2oz is spot-on for these popular setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"Counteract Balancing","offers":[{"title":"Default Title","offer_id":53961950298396,"sku":"85-4001","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/COUNTERACT-BALANCING-BEAD-DIY-KIT-2pk-2OZ-BAGS_98d79f41-42cd-4865-be64-7e7fee30e1f8.jpg?v=1772647241"},{"product_id":"counteract-balance-beads-2oz","title":"Counteract Balance Beads Tubeless Tire 2oz Pk","description":"\u003cp dir=\"auto\"\u003ePerfect 2oz dose for one tubeless tire on your Grom 125, Monkey 125, or Zuma 125! Counteract’s premium glass balancing beads deliver automatic, lifetime balance with zero vibration on 12\" wheels. Works great in tubeless tires — smoother ride, longer tire life, and better stability at all speeds.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact 2oz for 12\" tubeless mini-bike tires\u003c\/strong\u003e — matches Counteract guidelines for 120–130 mm widths on Grom, Monkey \u0026amp; Zuma\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubeless-optimized\u003c\/strong\u003e — flows perfectly in tubeless setups (stock on all three bikes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalances at any speed\u003c\/strong\u003e — works from 0 mph (unlike weights that need 30+ mph)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminates high-speed wobble \u0026amp; vibration\u003c\/strong\u003e on small-diameter 12\" wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 30% longer tire life\u003c\/strong\u003e and 2–5% better fuel economy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean custom look\u003c\/strong\u003e — nothing on the outside of your wheels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPMS safe\u003c\/strong\u003e and fully reusable when changing tires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEco-friendly\u003c\/strong\u003e — 99.9% recycled tempered glass with moisture-resistant coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003ePerfect Fitment For\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonda Grom 125\u003c\/strong\u003e (all years — 120\/70-12 front, 130\/70-12 rear)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHonda Monkey 125\u003c\/strong\u003e (all years — 12\" tubeless wheels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYamaha Zuma 125\u003c\/strong\u003e (2016–2026 models — 12\" tubeless)\u003c\/li\u003e\n\u003cli\u003eHonda Ruckus, Super Cub C125, and other 12\" mini bikes\/scooters using 120–130 mm wide tubeless tires\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Counteract Balance","offers":[{"title":"Default Title","offer_id":53961990144284,"sku":"MKSP2","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/Counteract2oz_75384f67-c279-4f3d-a419-12bc362a350a.jpg?v=1774647190"},{"product_id":"ngk-honda-cbr300r-iridium-spark-plug","title":"NGK Honda CBR300R Laser Iridium Spark Plug","description":"\u003cp dir=\"auto\"\u003eThe \u003cstrong\u003eNGK Laser Iridium Spark Plug (SIMR8A9 \/ 91064)\u003c\/strong\u003e is the premium upgrade choice for your \u003cstrong\u003eHonda CBR300R\u003c\/strong\u003e (2015–2022 models), delivering superior ignition performance, longer service life, and reliable starts in a high-revving single-cylinder sportbike. As NGK's top-tier Laser Iridium series, it's engineered for demanding applications like the CBR300R's 286cc liquid-cooled engine—whether you're commuting, canyon carving, or hitting the track.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis plug is the direct OEM-equivalent replacement (often factory-installed or recommended), featuring advanced \u003cstrong\u003elaser-welded fine-wire iridium center electrode\u003c\/strong\u003e and platinum-tipped ground electrode for exceptional durability and efficiency.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eNote: Always verify gap and torque during install; pair with fresh NGK plug cap\/wire if needed for best results. Not intended for heavily modified engines without tuning—consult a mechanic for tuned setups.\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":53974759538972,"sku":"SIMR8A9","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/ngk-cbr300r-crf250-laser-iridium-spark-plug.jpg?v=1773434849"},{"product_id":"maxima-mppl-multi-purpose-penetrant-lube-4oz","title":"Maxima MPPL Multi-Purpose Penetrant Lube 4oz.","description":"\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSuperior Penetration. Lasting Protection. Everyday Versatility.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eMaxima MPPL is a high-performance, \u003cstrong\u003eall-purpose penetrating lubricant\u003c\/strong\u003e engineered to tackle tough jobs in the garage, workshop, or on the trail. This unique, proprietary formula quickly penetrates rusted, corroded, or seized parts while displacing moisture and forming a durable protective film that guards against rust and corrosion long-term.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Acting Penetration\u003c\/strong\u003e — Breaks free stuck nuts, bolts, screws, hinges, and corroded components with ease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerful Water Displacement\u003c\/strong\u003e — Drives out moisture from metal surfaces, electrical connections, and hard-to-reach areas to prevent short circuits and future corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Rust \u0026amp; Corrosion Inhibitor\u003c\/strong\u003e — Creates a long-lasting barrier film that protects tools, machinery, chains, pivot points, and engine internals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Use Flexibility\u003c\/strong\u003e — Doubles as an effective \u003cstrong\u003efogging oil\u003c\/strong\u003e for 2-stroke and 4-stroke engines during storage, plus light lubrication for moving parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe on Surfaces\u003c\/strong\u003e — Won't harm plastics, painted finishes, or most rubber components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eIdeal For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eMotorcycles, dirt bikes, ATVs, and powersports equipment\u003c\/li\u003e\n\u003cli\u003eAutomotive repairs and maintenance\u003c\/li\u003e\n\u003cli\u003eBicycle chains, derailleurs, and pivots\u003c\/li\u003e\n\u003cli\u003eHousehold tasks (locks, hinges, tools, garage door tracks)\u003c\/li\u003e\n\u003cli\u003eMarine applications and outdoor gear\u003c\/li\u003e\n\u003cli\u003eWinterizing or long-term storage protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxima","offers":[{"title":"Default Title","offer_id":53993288728860,"sku":"95-04904","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/653169106-mppl-4oz-95-04904_newcap_aug2024_png.webp?v=1774039080"},{"product_id":"oem-honda-cbr250r-cbr300r-cylinder-base-gasket","title":"OEM Honda CBR250R \/ CBR300R Cylinder Base Gasket","description":"\u003cp dir=\"auto\"\u003eRestore reliable sealing and prevent oil or coolant leaks with this \u003cstrong\u003eauthentic Honda Cylinder Base Gasket\u003c\/strong\u003e. This precision-engineered gasket sits between the cylinder and crankcase on your single-cylinder engine, ensuring a perfect seal under the high temperatures and pressures of everyday riding.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eDesigned specifically for the popular Honda 250\/300cc liquid-cooled single-cylinder platform, this OEM gasket delivers factory-level fit, form, and function. It is a direct replacement for the original part (supersedes older part number 12191-KYJ-900 in many applications).\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFitment (Direct OEM Replacement):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eCBR250R\u003c\/strong\u003e (2011–2013 models)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCBR300R\u003c\/strong\u003e (2014–2022+ models)\u003c\/li\u003e\n\u003cli\u003eAlso fits related models including CB300F, CMX300 Rebel, CRF300L \/ CRF300R Rally (verify exact year via your VIN or parts fiche)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":54017818067228,"sku":"12191-K87-A30","price":3.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/DRS_9688.jpg?v=1777068112"},{"product_id":"oem-honda-cbr300-dowel-pin-12x16","title":"OEM Honda CBR300 Dowel Pin (12x16)","description":"\u003cp dir=\"auto\"\u003eEnsure precise alignment and optimal performance in your Honda CBR250\/300 engine with this genuine OEM dowel pin. Measuring 12mm in diameter and 16mm in length, this essential component is used in the crankcase assembly to maintain structural integrity during operation. Perfect for DIY mechanics, engine rebuilds, or routine maintenance, it provides a direct replacement fit for seamless installation without modifications.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eSpecifications\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003ctable dir=\"auto\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth data-col-size=\"md\"\u003eSpecification\u003c\/th\u003e\n\u003cth data-col-size=\"lg\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003ePart Number\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003e\u003cspan\u003e94301-12160\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eSize\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003e12mm diameter x 16mm length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eType\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eDowel Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-col-size=\"md\"\u003eBrand\u003c\/td\u003e\n\u003ctd data-col-size=\"lg\"\u003eHonda\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":54018125431068,"sku":"94301-12160","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/honda-grom-dowl-pin-94301-10120.jpg?v=1765235258"},{"product_id":"oem-honda-crb300r-rubber-radiator-mount","title":"OEM Honda CRB300R Rubber Radiator Mount #18","description":"\u003cp data-start=\"118\" data-end=\"471\"\u003eSecure your cooling system the right way with this genuine \u003cstrong data-start=\"177\" data-end=\"208\"\u003eHonda Rubber Radiator Mount\u003c\/strong\u003e, designed for the \u003cstrong data-start=\"227\" data-end=\"268\"\u003e\u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eHonda CBR300R\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e and \u003cstrong data-start=\"273\" data-end=\"314\"\u003e\u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eHonda CBR250R\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e. Identified as item #18 in the factory radiator diagram, this rubber isolator cushions the radiator while keeping it properly positioned within the chassis.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1bav4ku\" data-start=\"1563\" data-end=\"1578\"\u003eFitment:\u003c\/h3\u003e\n\u003cul data-start=\"1579\" data-end=\"1634\"\u003e\n\u003cli data-section-id=\"sptn4z\" data-start=\"1579\" data-end=\"1606\"\u003e2011–2013 Honda CBR250R\u003c\/li\u003e\n\u003cli data-section-id=\"h7hhep\" data-start=\"1607\" data-end=\"1634\"\u003e2015–2022 Honda CBR300R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":54039436591388,"sku":"61304-415-000","price":4.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/DRS_9756.jpg?v=1777502111"},{"product_id":"oem-honda-crb300r-radiator-mounting-collar","title":"OEM Honda CBR250R \/ CRB300R Radiator Mounting Collar #17","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eEnsure proper radiator alignment and secure mounting with this genuine \u003c\/span\u003e\u003cstrong data-start=\"142\" data-end=\"176\"\u003eHonda Radiator Mounting Collar\u003c\/strong\u003e\u003cspan\u003e, designed for the \u003c\/span\u003e\u003cstrong data-start=\"195\" data-end=\"212\"\u003eHonda CBR250R\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong data-start=\"217\" data-end=\"234\"\u003eHonda CBR300R\u003c\/strong\u003e\u003cspan\u003e. This OEM spacer (item #17 in the factory diagram) works with the rubber mounts to maintain correct positioning and prevent over-compression during installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-section-id=\"1bav4ku\" data-start=\"991\" data-end=\"1006\"\u003eFitment:\u003c\/h3\u003e\n\u003cul data-start=\"1007\" data-end=\"1042\"\u003e\n\u003cli data-section-id=\"w0yw2a\" data-start=\"1007\" data-end=\"1024\"\u003eHonda CBR250R\u003c\/li\u003e\n\u003cli data-section-id=\"u9anue\" data-start=\"1025\" data-end=\"1042\"\u003eHonda CBR300R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honda OEM","offers":[{"title":"Default Title","offer_id":54039442850076,"sku":"61102-KTY-D30","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/DRS_9755.jpg?v=1777502083"},{"product_id":"maxima-multi-purpose-penetrant-lube-mppl-14-5oz","title":"Maxima Multi-Purpose Penetrant Lube MPPL 14.5oz","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eWhen parts seize, rust builds up, or components start to stick, you need a solution that works fast and keeps working. The \u003c\/span\u003e\u003cstrong data-start=\"180\" data-end=\"257\"\u003e\u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eMaxima Racing Oils\u003c\/span\u003e\u003c\/span\u003e Multi-Purpose Penetrant Lube (MPPL)\u003c\/strong\u003e\u003cspan\u003e is a professional-grade formula designed to penetrate deep, break down corrosion, and provide long-lasting lubrication and protection across a wide range of applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1085\" data-end=\"1099\"\u003e\u003cstrong data-start=\"1085\" data-end=\"1099\"\u003eIdeal For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1100\" data-end=\"1265\"\u003e\n\u003cli data-section-id=\"egny0c\" data-start=\"1100\" data-end=\"1136\"\u003eStuck bolts, nuts, and fasteners\u003c\/li\u003e\n\u003cli data-section-id=\"1exoxu1\" data-start=\"1137\" data-end=\"1173\"\u003eCables, levers, and pivot points\u003c\/li\u003e\n\u003cli data-section-id=\"o8r6da\" data-start=\"1174\" data-end=\"1216\"\u003eHinges, locks, and mechanical linkages\u003c\/li\u003e\n\u003cli data-section-id=\"5erz3q\" data-start=\"1217\" data-end=\"1265\"\u003eGeneral maintenance and corrosion prevention\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Maxima","offers":[{"title":"Default Title","offer_id":54086064931100,"sku":"73920","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/MaximaMulti-PurposePenetrantLubeMPPL14_5oz_png.jpg?v=1777928354"},{"product_id":"cbr-manual-air-idle-control-aic","title":"CBR Manual Air Idle Control (AIC)","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eIf your CBR250R or CBR300R has ever hunted, surged, or hung at idle, you already know the factory IACV (Idle Air Control Valve) is the usual suspect. Our Manual Air Idle Control replaces that electronic stepper setup with a simple, manually-adjustable air bleed — so \u003cem\u003eyou\u003c\/em\u003e set the idle, and it stays exactly where you put it.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThis is a favorite for race and track builds where you want the electronic idle control out of the equation, and it's a clean fix when a stock IACV gets clogged, worn, or just flat-out fails. Running a piggyback or standalone ECU? A manual AIC takes idle out of the ECU's hands and hands it to you — no more fighting the stepper motor for control.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eTurn the adjuster in for less idle air, out for more. Cold-start, warm idle, post-tune touch-ups — it's all a screwdriver away.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eWhat it does:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eReplaces the factory IACV with a manual, tunable air bleed\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eEliminates IACV-related idle hunting, surging, and hanging idle\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eIdeal for race\/track builds and standalone or piggyback ECU setups\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eSimple screwdriver adjustment — no scan tool, no relearn procedure\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eGreat remedy for a failed, clogged, or worn OEM IACV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eHonda CBR250R [2011–2013]\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eHonda CBR300R \/ CBR300RA [2015+]\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAlso fits other 249cc\/286cc single-cylinder platform bikes sharing the throttle body (e.g. CB300R, CRF300, Rebel 300)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wicked Grom","offers":[{"title":"Default Title","offer_id":54259815022876,"sku":"WG-2003","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/cbr300-manual-aic.jpg?v=1785531872"},{"product_id":"tst-axle-slider-replacement-puck","title":"TST Axle Slider Replacement Puck","description":"\u003cp\u003e\u003cstrong\u003e\u003ci\u003eSold Individually\u003c\/i\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eAxle slider pucks are designed to be consumable — they take the hit and grind down so your fork bottoms, brake caliper, swingarm, and rotor don't. So when you toss your Grom down at the kart track (it happens to the best of us), the puck did its job. The mounting base underneath is almost always fine.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eThat's exactly why TST sells the puck by itself. This CNC machined delrin replacement puck threads right onto the mounting base from your existing TST Womet-Tech Universal Mini-Bike Axle Slider Kit — no need to re-buy the full kit, no need to pull the axle again. Swap the puck and get back to riding.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eDesigned by TST Industries and manufactured by Womet-Tech in Poland, same quality as the puck that came in your original kit.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eHeads up:\u003c\/strong\u003e This is the replacement puck ONLY — no mounting base or hardware included. It's made for the TST Womet-Tech Universal Mini-Bike Axle Slider Kit. If you don't already have the kit installed, grab the full kit instead. Sold individually — order the quantity you need.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eGenuine TST replacement delrin puck for the Universal Mini-Bike Axle Slider Kit\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eReplace only the used puck after a crash or slide — no need to re-buy the full kit\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCNC machined delrin construction with engraved TST branding\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eThreaded quick-replace design — spins onto your existing mounting base, no axle removal needed\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDesigned by TST Industries, manufactured by Womet-Tech in Poland\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eReplacement puck only — mounting base and hardware not included; sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TST Industries","offers":[{"title":"Default Title","offer_id":54287056306460,"sku":"WT-1090","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/WT-1090_TST-Industries-Womet-Tech-Mini-Bike-Axle-Slider-Replacement-Puck_Detailed-Image-1_2500x_jpg.webp?v=1783984859"},{"product_id":"fire-power-universal-engine-stand","title":"Fire Power Universal Engine Stand","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003ePulling your Grom or CBR300 engine for a rebuild, clutch job, or top-end service? The Fire Power Universal Engine Stand gives you a stable, adjustable platform to work on the engine outside the frame — no more balancing it on a bench or fighting to hold it steady while you wrench.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eBuilt from heavy-duty steel, the stand's length and height adjust to secure most single-cylinder engines, including the Grom's 125cc and the CBR300's 286cc powerplants. It ships with two engine shafts so you can mount the engine securely to the stand before you start pulling covers, splitting cases, or swapping components.\u003c\/p\u003e","brand":"WPS","offers":[{"title":"Default Title","offer_id":54290126635292,"sku":"61-0820","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/grom-cbr300-engine-stand.jpg?v=1783620851"},{"product_id":"aracer-af2-professional-wideband-afr-module","title":"aRacer AF2 Professional Wideband AFR Module","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe aRacer AF2 Professional Wideband AFR Module is the piece that makes real tuning possible. It's aRacer's improved wideband O2 module — a big upgrade over the older AF1 — and it now comes \u003cstrong\u003eincluded with a Bosch LSU 4.9 wideband oxygen sensor\u003c\/strong\u003e for stable, accurate, fast AFR readings you can actually trust.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe headline upgrade is simplicity. aRacer redesigned the harness so the AF2 \u003cstrong\u003eplugs directly into your aRacer ECU with no splitter, adapter, or extra cables\u003c\/strong\u003e — everything the old AF1 needed. That means a cleaner, faster install with no unused connectors or lengthy splitter wires to tuck away. Plug it in and get back to riding.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003ePaired with a compatible aRacer ECU, the AF2 unlocks \u003cstrong\u003eautotune\u003c\/strong\u003e and enables Closed Loop Fuel Compensation on Stage 2 and higher setups, so your engine can correct its own air\/fuel on the fly. It'll also run as a \u003cstrong\u003estandalone wideband\u003c\/strong\u003e when paired with an aRacer multi-function display (DG-2) or the aRacer app. No calibration needed — high accuracy, high-speed response, right out of the box.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eIf you're running an \u003cstrong\u003eaRacer RC MIni 5 ECU\u003c\/strong\u003e and want to tune it right, this is the module that gets you there.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eIncludes a Bosch LSU 4.9 18mm wideband O2 sensor\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eStable, accurate, fast AFR readings — major upgrade over the AF1\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003ePlugs directly into the aRacer ECU — no splitter or extra cables needed\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eUnlocks autotune + Closed Loop Fuel Compensation (Stage 2+ ECUs)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDoubles as a standalone wideband with a DG-2 display or the aRacer app\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNo calibration required — plug and play, high-speed response\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eNOTES: Required M18 Oxygen Sensor Bung on exhaust. \u003c\/em\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e See\u003c\/span\u003e\u003ca href=\"https:\/\/www.drowsports.com\/weld-on-oxygen-sensor-stainless-steel-bung-cap-kit\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e Weld-On Oxygen Sensor Bung\u003c\/a\u003e\u003c\/p\u003e","brand":"aRacer","offers":[{"title":"Default Title","offer_id":54424758518044,"sku":"ASI-0007-4","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/aracer-af2-wideband-o2-sensor.jpg?v=1747088851"}],"url":"https:\/\/www.drowsports.com\/collections\/cbr-250-300-swap.oembed","provider":"DROWsports","version":"1.0","type":"link"}