Questions? Call Us (562) 494-4990

FLP V3 GY6 Rear Disc Brake Conversion for RRGS PH80 Caliper

Be the first to review this product

Availability: In stock


NEW FLP V3 GY6 Rear Wheel Hub for disc brake conversion using RRGS PH80 Caliper.



FLP V3 GY6 Rear Disc Conversion is an all new design with a 35% reduction in weight vs. the V2 hub.  Along with the new design, the spinning process has also been improved the hub easier to install and remove.   If you want the ultimate in braking performance from your GY6 swapped Honda Ruckus to match your front disc brake swap, the FLP GY6 RRGS Rear Disc Brake Conversion is the perfect kit for you. This kit comes with the FLP RRGS PH80 bracket, hub designed for the RRGS/RPM disc brake, wheel bolts, and hardware; you only have to modify the case. Hub comes with M10x1.25p 4x110mm and M12x1.25p 4x4" bolt patterns, but can be custom ordered to the specifications to your wheel.

The hub also has the same offset as drum hubs, so it works with 3+4 offset or 4+3 offset with a spacer.

Additional Info

Additional Info



  • FLP V3 GY6 Rear Hub Disc Converion for RRGS PH80 Caliper 
  • NEW DESIGN about 35% lighter than FLP V2 Hub
  • M10x1.25p = 4x110mm Wheel Bolt Pattern 
  • M12x1.25p = 4x4" Wheel Bolt Pattern
  • Dual Disc Pattern for 220mm rotor and 200mm Dio rotor.
  • (Caliper, Rotor and brake lines not included)
Brand FLP


Write Your Own Review

Only registered users can write reviews. Please, log in or register



Use spaces to separate tags. Use single quotes (') for phrases.