{"product_id":"frando-fmf-130s-forged-radial-master-cylinder-left","title":"Frando FMF-130S Forged Radial Master Cylinder (Left)","description":"\u003cp\u003eThe Frando FMF-130S puts a forged radial master cylinder on the left bar. That's the direct-push setup you'd normally only see on the right side. It's built for mini bikes and scooters that run a hand-operated brake on the left lever.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWith a radial master cylinder the lever pushes straight into the piston instead of turning a 90° corner like an axial unit. You lose less force to friction, the bite point is clearer, and you get finer feedback through your fingers. The 14mm piston gives a firm, controlled lever. It's a good match for single-caliper setups and 2-piston calipers like the Frando FCC-660.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe body and lever are both forged 6061-T6 aluminum, so it's stiff where it counts. The lever pivot runs on bearings and stays smooth. You can adjust the lever ratio between 17mm and 20mm to dial in initial bite against progression. A separate knob adjusts lever reach, and the lever folds outward in a tip-over instead of snapping.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt comes with a smoked reservoir and clamp, a body-mounted electronic brake light switch, a single M10 x 1.25 banjo bolt, and a mirror mount.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eRadial (direct-push) design gives a sharper bite point and better modulation\u003c\/li\u003e\n\u003cli\u003eLeft-hand version with a 14mm piston\u003c\/li\u003e\n\u003cli\u003eForged 6061-T6 aluminum body and lever\u003c\/li\u003e\n\u003cli\u003eBearing-supported lever pivot\u003c\/li\u003e\n\u003cli\u003eLever ratio adjusts from 17mm to 20mm [CONFIRM]\u003c\/li\u003e\n\u003cli\u003eLever reach adjuster\u003c\/li\u003e\n\u003cli\u003eFolding lever helps it survive a tip-over\u003c\/li\u003e\n\u003cli\u003eElectronic brake light switch mounted on the body\u003c\/li\u003e\n\u003cli\u003eSmoked reservoir, single banjo bolt, and mirror mount included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFrando\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eFMF-130S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number \/ SKU\u003c\/td\u003e\n\u003ctd\u003eFMF-130S-14LLB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide\u003c\/td\u003e\n\u003ctd\u003eLeft hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eForged radial (direct-push) brake master cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston Diameter\u003c\/td\u003e\n\u003ctd\u003e14mm (9\/16\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eForged 6061-T6 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLever Material\u003c\/td\u003e\n\u003ctd\u003eForged 6061-T6 aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston Material\u003c\/td\u003e\n\u003ctd\u003eHard-anodized aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLever Ratio Adjustment\u003c\/td\u003e\n\u003ctd\u003e17–20mm [CONFIRM: Frando's own spec page says 18–20mm]\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLever Length\u003c\/td\u003e\n\u003ctd\u003e Long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandlebar Diameter\u003c\/td\u003e\n\u003ctd\u003e22.2mm (7\/8\") bars or clip-ons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBanjo Thread\u003c\/td\u003e\n\u003ctd\u003eM10 x 1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Fluid\u003c\/td\u003e\n\u003ctd\u003eDOT 4 or DOT 5.1 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Light Switch\u003c\/td\u003e\n\u003ctd\u003eElectronic switch mounted on the body (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003e Black Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cspan\u003e Universal. It fits 22.2mm (7\/8\") handlebars or clip-ons and is meant for a hand-operated brake on the left side, which is the rear brake on most scooters. Before you order, make sure the 14mm bore suits your caliper's piston area. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Frando","offers":[{"title":"Default Title","offer_id":54912020709660,"sku":"FMF-130S-14LLB","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/5679\/8748\/files\/frando-14mm-left-radial-forged-master-cylinder-fmf-130s.jpg?v=1794789687","url":"https:\/\/www.drowsports.com\/products\/frando-fmf-130s-forged-radial-master-cylinder-left","provider":"DROWsports","version":"1.0","type":"link"}