Taida Polaris RZR170 63mm Big Bore Package MAO 180cc Legal Kit

Taida Polaris RZR 170 MAO USAC Legal Big Bore Kit Power Package 180cc. It includes all the components to give your Polaris RZR 170 a major kick. This includes a 2V Big Bore Cylinder Kit with a flat top casted piston, a mid-range power camshaft, and a 2V Cylinder Head with larger valves.

Note: The fully upgrading kit does require a fuel controller or upgrading the ECU. We recommend getting the aRacer RC Mini 5 ECU to make sure your RZR 170 is running at a safe Air/Fuel Mixture.

 

The Polaris RZR 170 2V Big Bore Cylinder Kit is an upgraded engine performance part designed to increase power, reliability, and durability. The kit includes a fully machined 63mm cylinder that fits a 57mm spacing with good tolerances to ensure proper compression. The 63mm flat-top cast-piston meets the specification that is approved by MAO and USAC*. These pistons are fitted with 63mm piston rings and a wrist pin held together by clips. This kit comes with two options for base gaskets, a thinner gasket designed for higher compression and a thicker gasket designed for lower compression and also a head gasket.

Features:

• Cylinder Kit w/Piston
• Cylinder Head
• Rocker Arm Assy
• Camshaft
• MAO / USAC Legal 180cc Big Bore Kit*

Specifications:

• Bore: 63mm
• Flat Top Cast Piston 63mm
• Head Stud Spacing: 57mm
• Displacement: 180cc
• 1 Thin Base Gasket (High Compression)
• 1 Thick Base Gasket (Low Compression)
• 1 Head Gasket
• 1 Piston Pin
• 2 Piston Pin Clip

DROWsports 2V Cylinder Head for the Polaris RZR 170 is a fully upgraded top end replacement. This is a Big Valve head designed to fit 57mm spacing cylinders like the Polaris RZR 170 engine. This high-quality built Cylinder Head is designed with larger 2 valves, 30.5 intake / 26.5 exhaust. The oversized valves working with a high-end cam will create better overall power. The ports are properly machined to achieve high tolerance. It includes the valves, gaskets, manifold/exhaust studs, and nuts.

Features:

• 2 Valves: 30.5 intake / 26.5 exhaust
• Porting by Taida: 27.5mm intake / 26.5mm exhaust
• 6mm Manifold Studs w/Nuts
• 8mm Exhaust Studs

Taida T300 Camshaft for the Polaris RZR 170 is designed for performance racing heads. The T300 camshaft is one of the best upgrades for anyone who plans on making more power and better performance. The lobes improve the low and mid-range rpm, this increases the takeoff and the climb up to top speed. This cam is perfect for the Polaris RZR 170, it has that low-end power to help rip through the dirt and the mid-range power to keep it ripping. This paired up with a full top-end rebuild is one of the best combinations to get the power and speed you need.

Features:

• Intake lift: 19.4 - Lobe Greatest: 25.7mm
• Exhaust lift: 19.2 - Lobe Greatest: 25.45mm
• Sprocket Teeth: 34

*Legal as of Spring-Summer 2024. 

GY6-MAO-63