


Frando
Frando FMF-130S Forged Radial Master Cylinder (Right)
Frando FMF-130S Forged Radial Master Cylinder (Right)
1860 Obispo Avenue
1860 Obispo Avenue
C
Signal Hill CA 90755
United States
Choose options
The Frando FMF-130S is a forged radial master cylinder for the right lever. It's an easy upgrade for the front brake: firmer, sharper, and more precise than a stock axial unit.
A radial master cylinder has the lever pushing straight into the piston, with no 90° turn like on an axial setup. You lose less force to friction, the bite point is clearer, and you can feel exactly what the front tire is doing. The 14mm bore gives a firm, controlled lever. It suits single-disc front ends and 2-piston calipers like the Frando FCC-660.
The body and lever are both forged 6061-T6 aluminum. The lever pivot runs on bearings so it stays smooth. You can set the lever ratio anywhere from 17mm to 20mm to change how the brake bites, and set reach on its own knob. The lever folds outward in a tip-over instead of snapping.
It comes with a smoked reservoir and clamp, a body-mounted electronic brake light switch, a single M10 x 1.25 banjo bolt, and a mirror mount.
Highlights:
- Radial (direct-push) design gives a sharper bite point and better modulation
- Right-hand version with a 14mm piston (also available in 15/17/19mm)
- Forged 6061-T6 aluminum body and lever
- Bearing-supported lever pivot
- Adjustable lever ratio from 17mm to 20mm [CONFIRM]
- Lever reach adjuster
- Folding lever helps it survive a tip-over
- Electronic brake light switch mounted on the body
- Smoked reservoir, single banjo bolt, and mirror mount included
Specifications:
| Spec | Detail |
|---|---|
| Brand | Frando |
| Model | FMF-130S |
| Part Number / SKU | FMF-130S-14RLB |
| Side | Right hand |
| Type | Forged radial (direct-push) brake master cylinder |
| Piston Diameter | 14mm (9/16") |
| Body Material | Forged 6061-T6 aluminum |
| Lever Material | Forged 6061-T6 aluminum |
| Piston Material | Hard-anodized aluminum |
| Lever Ratio Adjustment | 17–20mm |
| Lever Length | Long |
| Handlebar Diameter | 22.2mm (7/8") bars or clip-ons |
| Banjo Thread | M10 x 1.25 |
| Brake Fluid | DOT 4 or DOT 5.1 only |
| Brake Light Switch | Electronic switch mounted on the body (included) |
| Color | Black Edition |
| Included | Master cylinder, lever, smoked reservoir + clamp, single banjo bolt, mirror mount, brake light switch |


