Taida 67mm 232cc High Compression Forged Piston
Taida 232cc Forged Piston for GY6 232cc an RZR 170 232cc
Taida GY6 2-Valve 63mm Forged Piston Set

Taida

Taida GY6 2-Valve 63mm Forged Piston Set

Sale price$120.00 Regular price$145.00
Size:Type 1
Quantity:
Pickup available at 1860 Obispo Avenue Usually ready in 2-4 days

Taida GY6 2-Valve 63mm Forged Piston Set

Type 1

1860 Obispo Avenue

Pickup available, usually ready in 2-4 days

1860 Obispo Avenue
C
Signal Hill CA 90755
United States

+15624944990

Your big bore build is only as tough as the piston inside it. The Taida 63mm Forged Piston Set is built for GY6 engines running a 63mm cylinder and a 2-valve head, whether that's a 180cc bolt-on kit or a stroker build pushing past 200cc.

Cast pistons work fine for stock power, but they can get brittle under high heat and high RPM. This piston is forged from a solid, pre-hardened aluminum alloy. That makes it denser and stronger, so it holds up better to the extra heat, compression and RPM of a built engine. It's the same reason we spec forged pistons in our own Taida performance cylinder kits.

The crown is high compression and has valve reliefs cut for 2-valve GY6 heads. That makes it a direct match for the Taida 2V big port heads and most 2V performance heads. It ships as a full set with rings, wrist pin and clips, so it's ready to drop onto your rod.

Spec Detail
Brand Taida
Bore 63mm
Piston type Forged aluminum
Valve layout 2-valve (2V) reliefs
Compression vary depending
Wrist pin diameter 15mm
Compression height Flat, 1.5mm, 2.5mm, 3.5mm
Ring set
Displacement ~180cc on stock 57.8mm stroke / ~205cc on 66mm stroker crank

NOTES: The compression Ratio will vary depending on cylinder head volume, gasket thickness, crankshaft stroke, and piston deck height.